INDUSTRIAL GRADE
MARINE PROTECTION
NO FLUFF. JUST TOUGH.
WELCOME TO ORTHODOLPHIN MFG.
Look, if you're looking for fancy retail packaging with dolphins smiling at you, go to West Marine. We make DolphinX industrial silicone coatings. I mix this stuff myself in the back shop using a custom-built centrifuge.
I've been machining parts for 20 years and I know what salt water does to metal. It eats it. My coatings are designed for:
- COMMERCIAL FISHING HULLS
- ALUMINUM PONTOONS
- HYDRAULIC LINES
- DOCK HARDWARE
MADE IN USA
SOURCED IN ARIZONA
FAST SHIPPING
UPS GROUND ONLY
PRODUCT LINEUP
500
DX-500 "THE HULL SEAL"
PART #: DX-500-GAL
Standard gray silicone alkyd coating. Thick viscosity. Needs to be thinned if you are spraying it (use Xylene only). Best applied with a roller.
9000
DX-9000 "SLICK COAT"
PART #: DX-9K-QT
High temp silicone ceramic blend. This is the new stuff. I tested it on my own fork truck exhaust manifold and it didn't peel. Good for engine rooms.
TECHNICAL DATA SHEETS
MATERIAL PROPERTIES (ASTM TESTED IN HOUSE)
| PROPERTY | DX-500 | DX-9000 |
|---|---|---|
| Base Chemical | Silicone Alkyd | Silicone Ceramic |
| Viscosity (cPs) | 2500-3000 | 1500-1800 |
| Shore A Hardness | 45 | 60 |
| Salt Spray (hrs) | > 500 | > 1000 |
*Testing performed on calibrated equipment. No warranty implied.
APPLICATION NOTES:
- SURFACE MUST BE GRIT BLASTED TO SA 2.5.
- DO NOT APPLY IN DIRECT SUNLIGHT IF TEMP IS OVER 100F.
- CLEAN TOOLS IMMEDIATELY. ONCE IT CURES IT NEEDS A GRINDER TO REMOVE.
>> SHOP_FOREMAN_AI_V1.0
POWERED BY GEMINI NEURAL NET (BETA HARDWARE)
CONTACT THE SHOP
OWNER / OPERATOR
RICK S.
EMAIL: [email protected]
MON-FRI: 06:00 - 14:30
SAT: BY APPT ONLY
SUN: CLOSED (WATCHING FOOTBALL)